18. 42′ Above Ground Pond Stage 1

Back to Table of Steps

Back to Previous Step

Above Ground Pond Stage 1

WRITTEN INSTRUCTIONS

18-W1 – Above Ground Pond Stage 1

Click on the link to view and print the written instructions on how to install the above ground pond metal enclosure.

DIAGRAMS

18-D1 – Pond Fabrication Step 1

Click on the link to view and print the above ground pond layout diagram showing the basic layout of the pond and spacer block fabrication instructions.

18-D2 – Pond Fabrication Step 2

Click on the link to view and print fabrication details for the above ground pond metal.

Click on the link to view and print the above ground pond cross section diagram.

VIDEOS

18-V1 – Above Ground Pond Excavation & Support Blocks

Note: This video shows an 18′ dome with an oval pond. The 42′ dome requires an approximately 12′ 5-1/2″ diameter round pond. The process for placing the support blocks and excavating for the pond is essentially the same. See the Written Instructions and Diagrams for specifics.

18-V2 – Pond Metal Assembly and Installation

Note: This video shows metal for a 26′ oval pond being fabricated. The 42′ dome requires an approximately 12′ 5-1/2″ diameter round tank. The process for fabricating the pond is essentially the same. Refer to the Written Instructions and Diagrams above for specifics.


Click on the link to go to the next step: 19. Above Ground Pond Stage 2